Protect Your Pride And Joy With The Ghost Immobiliser
Ghost Immobiliser will protect your valuable property from theft. This system is discreet & does not require any additional key fobs to operate.
The device utilizes buttons on your vehicle (steering wheels doors, door panels, and the centre console) to create a unique pin code sequence that can be changed up to 20 times. This allows your vehicle to begin.
Simple PIN Code Change Process
Many owners are upgrading their security due to the rising number of vehicle thefts. There are many types of security devices that are sold aftermarket including tracking systems, immobilisers and alarms. They're not all equally effective at protecting your vehicle. A tracking system can assist you in locating your car if it is stolen, but it will not stop the crime. An immobiliser, on the contrary, does exactly what it says on the tin: it shuts down your car's engine so that it is unable to be started. The Autowatch Ghost immobiliser is one of the most advanced options on the market, making it nearly impossible for thieves to take your vehicle.
The
ghost tracker installation device uses the buttons on your car to create an unique sequence that needs to be entered in order for the engine to start. This can be done using the indicator stalk, window or heater buttons. Additionally option, there is a mobile app which acts as an emergency PIN code bypass and allow the driver to operate the car without using the button sequence. This is especially useful if you need to hand your car over to a valet service or parking, as the immobiliser will still be activated, but not disabled.
The Ghost is an unique and innovative device that works with the buttons on your vehicle rather than as a standalone unit. It's not just an effective deterrent for vehicle theft and vandalism, but it can be used on future vehicles you own. This makes it a far better investment than a traditional wheel lock.
Small, weatherproof device
The
autowatch ghost immobiliser installation Ghost Immobiliser is a high-tech security system that protects your car from key hacking and cloning. It also blocks ECU swapping. It is a weatherproof tiny device that connects directly to your vehicle's ECU via the CAN data bus to disable the engine. It can be fitted into the vehicle without any wiring, and has been thoroughly tested to ensure compatibility with all vehicles. It also is resistant to jamming devices that are a popular technique that car thieves use to circumvent immobilisers.
The benefit of using CAN data is that it runs silently when compared to conventional systems. It is not able to be detected by sophisticated RF scanning and code-grabbing techniques as well as recognized by conventional diagnostic tools. The Autowatch ghost doesn't produce LEDs, but instead utilizes the buttons in your vehicle such as steering wheel, centre console or door panels to create a unique, programmable disarm sequence. The sequence can be extended up to 20 presses for extra security. The iPhone app allows one, authorized connection, with the pairing code unique to the Ghost and the communication between the two is encrypted.
The Ghost also prevents thieves from stealing the key to a new car or replacing the ECU to bypass the immobiliser and begin the engine. It will only allow the engine to run only if the correct pin code is entered. It can also be put into valet/service mode for a temporary operation (with defined parameters like a 30mph speed limit) so that you can transfer your vehicle to a valet service for servicing without the need to enter a pin code.
Each vehicle is tested
The Autowatch Ghost is the world's first aftermarket CAN bus immobiliser that can be connected to your vehicle's existing wiring and connects to your engine control unit (ECU). The device snoops on electronic signals to disable the system of your vehicle from going through its normal startup routine until you input a custom passcode. The system can be activated or deactivated by using your smartphone's application without the need for additional wires.
The factory-installed immobilisers function by using a transponder, which is embedded in the key. This transmits a signal to the ECU. The car will start if the correct code is transmitted. However, if the transponder of a different vehicle is used instead, the immobiliser will not recognise it. This allows the vehicle to be stolen and started. The
ferrari ghost installer immobiliser has been developed by a South African company at the forefront of vehicle security systems technology. It shields you from hacking or key cloning and even key theft. Only by physically towing your vehicle away from thieves could they get it, and they would still not be able to drive the vehicle.
Ghost makes use of the buttons on your vehicle, including the indicator stalk as well as the steering wheel and door panels to generate an unique, changeable PIN code sequence that must be entered before you are able to use your car. This is done without any extra hardware, such as keys fobs. It can take up 20 to 20 presses. It is also inaccessible to devices for diagnosis and transmits radio frequency signals, meaning thieves cannot make use of sophisticated RF scanners or code-grabbing techniques to determine if the system has been set up.
ghost immobiliser fitter is harder to remove than car alarms that require disarming with the buttons. This makes it a perfect complement to a GPS tracker which helps locate your car after it has been taken.
Override of emergency PIN code
You don't have to look far on social media to find stories or even videos of vehicles that were stolen by car thieves employing the latest technology tools available to them. This includes key-cloning devices and hacking devices that allow you to start your car without the original keys.
The Ghost immobiliser has been designed to stop this, and give you an extra layer of security to protect your vehicle from being targeted by thieves. It creates an individual pin code sequence that is triggered by the buttons you have on the steering wheel, door panel, and the centre console. The unique pin code must be entered together with your original key fob in order to stop the vehicle from starting. The unique override pin is found on a black card that you receive following your installation. It is simple to remember since there are no LED indicators.
The device is hidden within the vehicle's wires and doesn't emit any radio signals, so it can't be detected by modern thieves using diagnostic software that is able to recognise what type of security system you have installed. This makes it a fantastic alternative to the tracker.
Unlike most other security systems that have an engine relay bay these CANBUS Immobilisers communicate with the car's ECU and BCM via the CAN data bus (brand dependant). This allows them to disable the vehicle completely with an electronic block of commands that is sent to both the ECU and the engine.
It is also possible to connect a separate analog immobiliser, alarm or tracker to these systems but this must be specified prior to installing the device. They are also compatible with valet/service modes and a great alternative to a tracking device if you bring your vehicle to the dealer for an electrical problem.
Service/Valet mode
In recent times there has been an increase in vehicles stolen without the owner's keys. It's now more easy than ever
how to install a ghost immobiliser take your joy and pride due to the availability of key cloning tools & door lock picks. We have created the Autowatch Ghost Immobiliser to combat this. It blocks your vehicle from being driven even if your keys have been cloned.
It directly communicates with your car's ECU (Engine Control Unit) via the CAN data circuit. It's completely quiet since it doesn't use radio frequencies or keys fobs. This means it isn't detected by diagnostics or other car hacking devices. It also shields against the possibility of adding an additional key or replacing the ECU to bypass the system, since only the correct PIN code will allow the engine to start.
The device is hidden within your car and can be accessible via buttons on your steering wheel, centre console and door panels. Before you can begin your car, you need to enter a unique and changeable PIN code up to 20 numbers.
This is the first aftermarket CAN bus immobiliser that was designed. It will prevent your vehicle from being driven or started if you don't enter a PIN code first. If you're driving away with the device in motion, an indicator will appear on your dashboard that will flash continuously for around 300m. Entering your PIN code will deactivate the anti-hijack. Your car will continue to run just as normal. If you don't enter your PIN in this moment, the indicator will continue to flash and require a new pin code every time you attempt to start your car.
