Tips For Replacing a Window Handle
It is simple to change your window handle from the convenience of your own home. Use these helpful tips to ensure a smooth operation and great appearance.
Start by removing the screws to expose the screws within the uPVC window handle. Make sure you measure the spindle in order to make sure you are getting the right size replacement.
1. Determine the length of the Spindle.
If you're
replacing a window handle, it's important to determine the dimensions of the spindle correct. This is because it could determine how tight or loose the handle is, and whether it's able to lock properly within the frame of the window. The spindle is a metal shaft that connects the handle to the lock in the window frame. The spindle is available in the standard 8mm industry cross-section or the older 9mm versions. The current industry standard is 8mm however this wasn't always the case, so when buying a new handle it's essential to check the measurements.
The easiest way to measure the spindle length is to remove the handle that is currently in place, this can be done by turning it into the open position, then unscrewing the two screws (which may be hidden behind plastic caps that have to be removed) which hold the handle. Once the handle is removed, measure the distance from the base to the point at which it ends. This will give you the measurements needed to buy a replacement.
There are many options available when it comes time to choose the right window handle. From sleek chrome that will fit in with a modern style, to traditional burnished bronze that looks great in restored Georgian rooms, or the more traditional Tudor cottages with mongoose tails curled. The possibilities are endless, but the most important thing is to choose a style that complements your home.
Espag handles are commonly used to
upvc handle window window frames and are always the exact same size with a 43mm central. Cockspur handles range between 58mm and 62mm, but there are replacements for both sizes. Cadenza window handles are a different size since they have an angled blade that operates with a multi-point locking mechanism within the window.
When choosing a window handle, you should also consider the hand you use to open your door. Inline Espag window handles aren't handed and can be used for left or right handed
double glazed windows handles. Cranked window handles are only used on windows that open in one direction.
2. Take the handle off
A window handle that is sagging can be a hassle, regardless of whether the handle is damaged or worn out. The good news is, you can replace a uPVC handle by yourself. All you need is some basic tools and some time to complete the process.
The first step is to have to open the window and ensure that it is in an unlocked position. The next step is to remove the screw caps that are holding the handle in position. Once these caps are removed, you can start working on the removal of the handle itself.
The handle is connected to a spindle in the window frame. Depending on the kind, this is held in place either by a screw or pin. The most commonly used handles are the inline Espagnolette and cockspur handles. Both
types of window handles of handles can be found on casement windows including aluminum ones. The handles can be locked with a key in order to stop unauthorised access from outside. Or you can lock the handles by turning them clockwise.
To remove the handle, you'll need a flat blade screwdriver to release the clip holding the handle. Once this is released, the handle will fall off the spindle. Once the old handle is removed, you'll need to measure the length of the spindle and ensure that your new handle is compatible with the spindle's length.
Once you have decided on the proper size for the handle, screw it in the correct position. It is important to ensure that the new handle is firmly fixed and is turning in the correct direction (clockwise for open or counterclockwise for closed). It is also important to make sure that it has not been installed upside down.
In the end, you must replace the screw cover caps. After you've completed this step, you should test the handle to be sure it's functioning properly. It is also recommended to test the locking mechanism by moving the handle until it is locked position, and then back to the locked position.
3. Take off the Screws
A uPVC handle is an important component of any house and is the first thing that shows signs of wear or damage. It can be caused by natural causes or from regular use and sometimes even intentional damage caused by criminals who want to open a closed window and gain entry to your home. However, a simple repair will solve the issue and stop the problem from recurring.
uPVC handles could also be difficult to remove if the locking mechanisms are not functioning properly. It is often possible to fix the issue by replacing the multipoint locking mechanism rather than the entire handle. This could save you money.
After you've removed the old handle you'll need to remove the screws that were holding it in place. They're usually on the inside face of the handle base. It could be necessary to use a screwdriver to accomplish this. Be cautious not to over tighten the handle as this could cause it to become loose.
You will then need to locate the fixing screws or pins that keep the new handle in the correct position. These are usually located on the inside of the handle base. You'll require a screwdriver to take them off. If you wish to replace them, you can do so by replacing the screw caps and test the handle to make sure it functions correctly.
If you're ready to put in the new handle, simply line up the spindle with the cut out in the window mechanism and screw in place. Make sure the handle is in an open position and that any screws are securely secured prior to replacing the screws' covers, if you wished to do this. It's done! You can enjoy your newly installed window handle. We hope this will allow you to avoid the need for expensive replacement of your
external door handles euro lock and window in the future. Contact us if you require more information about this or any aspect of your uPVC window.
4. Fit the New Handle
The procedure of replacing a damaged window handle or updating it is easy and can be completed within a few easy steps. Identifying the kind of window handle, determining its spindle length, and knowing what tools you'll require to complete the task are key. Safety is always the top priority when working with windows and tools. Make sure you follow the steps and ensure that you have the right handle for use.
The first step is to find the screws that hold your existing window handle in place. Then, remove these, whilst keeping a safe hold on the handle itself to stop it from falling and causing injury. After the screws have been removed, you can put them in a safe place to be replaced in the future.
After removing the old handle, you can begin to install your new one. The handle needs to be perfectly positioned in order to function correctly and secure the window in its closed position. Then you need to slide the metal bar that is square on the handle into the hole for the window mechanism.
The final step is to replace the screws caps and test the handle to ensure it works. If you're not satisfied with the outcome or if your window doesn't open and close as it should, the next step is to call our experts who will be able to assist you.
Most homes in the UK have uPVC windows. As they are, a lot of them will need to be replaced at some point due to damage or wear. Anyone with some DIY knowledge can accomplish the task. It is crucial that the handle you choose is in line with the style and size of the window. If you're not sure what type of handle you need, feel free to get in touch with our team who will be able to provide you with the options available.
