Repairs to uPVC Windows
uPVC is a fantastic option for modern homes. They are easy to maintain, durable and long-lasting. They don't get rotten or rusty like timber and aluminum.
Regularly cleaning and lubricating UPVC windows and doors is vital. This will reduce repair costs as well as increase energy efficiency.
1. Broken Glass
The damaged glass in your windows can cause serious damage to your home and even be fatal. It is essential to make sure that your windows are in good shape.
For single pane windows, it is fairly easy to replace them, and the new window is usually able to fit into the frame that was previously installed easily. However, if you have
double Glazed window repairs near me pane windows that are held in place by internal beading, it will be more difficult to take out the old panes and put in new ones. In this instance it is essential to buy plastic spacers to aid in fitting the new pane into the window frame.
Wearing protective eyewear and thick gloves is a must when you are planning to remove the glass yourself. It is also an excellent idea to lay down a dropcloth before you start working on the glass so that any fragments of glass fall onto the cloth instead of landing on the floor where they could be trampled on and cause further damage.
It's a great idea seal the gap after the glass is removed. This will stop drafts and water from getting into your property until a professional is able to repair the window. It also acts as a barrier, preventing any intruders from gaining entry to your home. If the gap is particularly large, you might want to consider using a security door that has an integrated window, as it offers the best of both worlds.
2. Sagging
Upvc is a long-lasting, energy-efficient and affordable alternative to timber sash window. Over time, they can be affected by a variety of issues that include sliding. A window that isn't properly aligned can cause problems with light, draughts, and even security. It is crucial to act immediately if you discover that your uPVC windows are sliding.
Repositioning the hinges could help fix a window that is sagging. To do this, you'll need open the window to access the frame. Then, you can remove the hinges at the top and bottom using a screwdriver and adjust them counter-clockwise or clockwise. Close your window to check the fit after you have repositioned your hinges. If you're satisfied with the fit, tighten the screws to ensure they stay in the right place.
If you cannot reposition the hinges, you could have to replace the seal. Seals made of rubber can dry out and lose their elasticity over time, causing them to loose their elasticity. If this happens, it's crucial to replace the seal as soon as you can to ensure that your uPVC windows are watertight and secure from draughts.
UPVC handles can also loosen up. This is usually due to screws that have loosened over time, but it can also be caused by the handle mechanism wears out. It's fairly simple to fix a loose uPVC handle. First, you'll need to shut the window and do a test fitting. The corner joints of the sash must be aligned with the casing joint. If it doesn't then you can use the screwdriver to loosen the handle. Then, you can turn the mechanism into position.
3. Water Leaks
It is essential to act if you get up each morning to find mouldy walls and wet floors. The leaks of water from windows do are not just a cause for degrading of the structure of your home but also hamper your efforts to control the temperature within your home. The most frequent reason for leaks in uPVC windows is that the sealant surrounding the frame is either damaged or is missing.
This is an easy fix that can be completed by any DIYer who has the ability. Based on the severity of the problem the caulking that was used up may require removal before a new layer of caulk can be applied. It is essential to keep in mind that when it comes to
uPVC window repairs, do avoid the temptation to "over-caulk' as this will only make the area harder to clean and could reduce the efficiency of your energy.
Check that any drainage holes do not have debris inside them and ensure that the sill pan is properly angled to allow the water to drain from the window. In more serious instances, you might have to consider replacing the
window repair near me.
Mold spots and rotten sills are another sign of water leakage. This fungus thrives in damp conditions and can quickly spread across the house.
If the leakage is occurring between the double-glazed glass, it is more likely the issue is with the seal than the frame. A uPVC specialist can easily fix this issue by replacing the glass seal. This will restore the full insulation of your windows.
4. Faulty Hinges
Hinges could be at fault for the reason that your uPVC window is difficult to open or it opens with the breeze. Anyone with the skills to fix them can replace these in a matter of minutes.
Most households in the UK will have either top hung or side-hung uPVC windows that have hinges and, like all mechanical parts, they will wear out over time. It's very simple to replace a hinge on a window, but it's simpler if you have someone to help you to hold the frame.
Verify that the uPVC hinges open and close in the correct direction. Check for the arrows on each hinge to determine which way the window should be opened.
The issue can be caused by opening the window incorrectly or due to a poor installation in the factory. This can often be resolved by sending us a photograph on our website. We will be more than happy to give you advice.
It is also essential to ensure that the hinges are lubricated on a regular basis. This can be done by applying an oil that is light in nature to the hinges, we recommend using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication can allow the window to operate and close more easily. It can also reduce the risk of a window sticking and prevent corrosion. It is recommended to perform this every year. WD40 and other solvent based lubricants are not recommended as they can damage the parts of your uPVC window.
5. Draughts
Draughts can be caused by different factors. Firstly the hinges, again because of wear and tear, could become misaligned. This causes a gap to form where the sash joins the frame. If they are beyond repair, it may be required to realign them. The interlock may be unbalanced. This happens on the hinge's side and may need to be cleaned. In some instances, it may be necessary to replace the hinges.
These seals can wear down or get damaged over time, allowing air escape. Installing high-quality weatherstripping can help keep draughts at bay. Replace the upvc windows with low-emissivity lenses. This will help to regulate indoor temperatures and decrease draughts.
The final method to cut down on drafts effectively is to use a draught-excluder. These are usually made of fabric tubes filled with a filler that can be hung over your
window repairs sill. These will keep your home warm by blocking cold air.
With a bit of regular maintenance and repairs windows made of upvc will continue to provide excellent security and insulation for your home. It is important to remember that all windows will eventually become worn out, and it may be more cost-effective to simply replace them than to repair them. If you are experiencing issues with your Upvc windows, it is always best to seek professional assistance immediately.
