Door Handle Replacement
Door handles seem like something minor but if you aren't happy with the way they look or are unable to use them and use, you should consider replacing them. With a little patience, you can put in a new handle in no time.
Modern door handles are usually equipped with cover plates that hide the screws for an attractive look. If your new handle doesn't already have them attached, you will have to attach them separately.
Removal of the old Handle
The door handle isn't only a decoration for your home It's also an important safety feature that lets you to lock and unlock the door. Over time the aluminium door handle (
this link) handle can start to lose its grip or feel loose. It might also appear aged and worn. This is a sign that it's time to replace the door handle.
One of the first indications that your door handle is in need of replacing is when it becomes difficult to operate. This is an issue because it means that you are unable to no longer lock or unlock your door, which could create an security risk to you and your family.
Another reason to replace the door handle is if it's damaged or broken. A damaged or broken door handle could be quite dangerous, especially if your children or elderly family members struggle to open it, and get trapped in the. It's simple to fix a damaged handle on doors.
Most modern door handles are standard size and therefore should fit any door. If you're not certain that your new door handle will work, remove the old one and measure its housing holes. This will let you purchase the correct size door handle.
It is easiest to remove the old door handle by unscrewing it from the door. Usually it is a matter of using a screwdriver. Some door handles have the cover plate, which conceals the screws used to mount them. It is necessary to remove this to get to the screws. After removing the old handle, take note of how the spindle has been connected. This will assist you in aligning the new handle.
You can also remove the door handle by unscrewing the latch mechanism. You can use a screwdriver for removing the door handle. However, you will have to locate the small latch, which is located on the edge of the trim piece. After you have removed the latch, you can unscrew the handle from the strike plate and then the latch from the door edge.
The Strike Plate
You'll have to replace your latch plate when you replace the handle. It's the part that is the one that holds the hole in which the door's latch hooks in when the door closes. The package the new handles come in will include two latch plates: one that is rectangular and the other circular (see the diagram above for the components of a door handle). If you have a rectangular latch plate, replace it with a round one. This will let the latch hook into the strike plate, making the handle more convenient.
The first step is to unhook the screw that is holding the old latch plate. These screws can be quite tight, and may require some force to loosen. It may be helpful to get a second person to assist with this part if possible.
After the screws are removed the latch will slide out of the door easily. If the latch plate is stuck or doesn't move, use a small file to scrape the edges. This can sometimes free up the plate.
Now, you can proceed to preparing the new door strike plate to be installed. With the wood screws that were included with your new handles, screw the latch plate to the inside of the doorjamb. Be careful not to over-tighten the screws, as this can cause damage to the strike plate.
If you're not sure if the latch plate is in the proper position You can try closing and opening the door to determine if it closes and latches correctly. If it doesn't then you'll have to adjust the strike plate upwards or down, or forward or back until the door shuts and latches properly.
If the door is still moving or jiggling, you may need to enlarge the hole for the latch in the strike plate. This is more frequent for older
bi-fold doors handles, but can happen due to wear and tear hinge mortises that are too shallow or are not sized correctly for the latch, or from damage or a broken strike plate. If this is the case you can use a metal file instead of a chisel or hammer to adjust the strike plate.
Removal of the Latch
The latch is the angled piece of metal that slides through the hole that runs along the inside edge of your door. The latch is moved forward when you turn the handle. It also connects to an opening in the frame of the door to keep the
door handle replacements shut. If your door shakes when you close it, replacing the latch may be the only thing needed to correct the issue.
The screws that secure the door latch are difficult to see however, you can use a screwdriver to make a small hole on the trim plate, and then pull the latch off. After removal of the trim plate you should be able to remove the latch as well as the bolts that hold it and the spindle in position.
If the latch won't be released you can try using a paper clip or a tool to release it from the handle mechanism. Insert the item into the recessed latch slot and gently turn or jiggle it until you feel the latch and handle start to separate. You may have to repeat this process several times before you can pull the latch out.
You should be able to slide the new latch into its slot with no issues after you've removed the old one. Make use of the new screws to connect the latch to the strike plate or door frame. Make sure it is correctly placed in the slot, aligned with the screw chambers.
Take note of the backset (the distance between the center of the large hole in the front of the door and the edge) before installing the new handle. Make sure that the size of the latch of the new handle is in line with the measurement.
You'll require a new lock cylinder if you're
replacing upvc window handles the latch and handle, or your old one is damaged. If you're not changing locks the new lock should fit in your existing recess, and work with your current keys. Be sure to choose an entry point with rectangular cover plates that match your handles.
Then remove the Cover Plate
You can replace your door handles with a modern rose and lever designs to improve the look of your home. You can buy complete sets that include matching escutcheons as well as privacy adaptor kits.
To replace the door handle inside take off the cover plate (or rose) that covers the screws and mechanism. Use a flathead to remove the cover plate. It may have a slot along one edge or be held in place by pins.
When the cover plate is removed, remove the screw that holds the inside handle in place and set it aside. You'll also want to take out the screws that hold the latch and inner plates, which you can do by loosening them using a Philips screwdriver. Take the inner plates and latch from the door. Place them aside.
Not all doors have this gap. If yours doesn't then you'll have to make a hole in the door to install the new handle. The process for doing this is similar to the procedure for opening a door with a lock, but you'll be taking extra care not to harm the frame or door.
After drilling the holes, you'll need to install new door knob screws. Be sure to purchase the same size as the old ones, so you don't end up with a handle that's too tight or too loose. Installing a new strike rod and latch is also mandatory. These are not included in the majority of door handle sets.
If you're looking for a quality replacement interior door handle set Try the Amazon's Choice FAERSI two-piece chrome finish handle set. It's factory-fitted and has been praised with hundreds of five-star reviews. It's a great option to replace damaged or worn door handle hardware in the interior of your Chevy HHR.
