Sliding Patio Doors Repair
It is possible for sliding patio doors to be difficult to open and close. This can be due to a range of issues, such as dirty tracks or misaligned rollers.
Clean and lubricate your rollers. You can also re-align the rollers using the adjustment holes that are located on the bottom of the door panel with movable doors.
Dirty or damaged track
A damaged or dirty track can cause the door to not move properly. Over time, dirt, grit, and even rust can build up, preventing the track to slide smoothly. The solution is to thoroughly clean with the use of a brush and mild detergent. This job should be done regularly to ensure smooth operation and to make sure that costly repairs are not required in the future.
A door that is leaky is another common problem that requires immediate attention to avoid water damage, mold growth and structural damage. The most common cause is worn weather stripping and misaligned doors, which can be fixed by replacing old weather strips and aligning the door.
Rollers that veer off the track are a common issue that can be fixed with some simple DIY work. This is a task that can be challenging, so ask a friend to assist you. To move the rollers around to the right position, sit inside the house and lean one of the panels toward you. To prevent the panel from falling, put it on sawhorses when it's been lifted off the bottom track. Then, loosen the roller's screws and pry them using the screwdriver. You can now clean any dirt that is caught between the wheel and the tracks. Then, clean each wheel with denatured alcohol and a rag, then reposition the wheels and attach them to their tracks.
If a portion of the track is bent, it might be possible to straighten it using the help of a rubber mallet and a block of wood. However when the bent section is near the hinges and has the potential to cause further damage, you'll be better off calling an expert for safety reasons.
Misaligned Rollers
If your sliding door isn't moving as it should it's because the roller wheels aren't aligned with the track. The wheels could be dirty, rusted or their bearings have worn out. This causes friction between the bottom of the door and the track, which causes it to grind or snag when it's closed or opened. This can also trigger squeaking sounds.
This is a straightforward solution. The wheels are mounted on a bracket which can be adjusted, which means you don't need to take off the door. Use a screwdriver to find the adjustment holes on the frame (usually on either side). Turn the screws to turn the wheels. By turning the screw clockwise, you raise the wheel, whereas turning it counterclockwise will lower it. Continue adjusting until the door moves smoothly and quietly when open or closed.
It is important to adjust the wheel before making adjustments to your latch. The latch hooks have to be aligned with the strike plate (the opening through which the latch locks) in order for the lock to function properly. If you don't, the latch could accidentally open or close while you're away from the room.
Patio doors that slide are an investment, and ensuring they are functioning correctly helps keep your family safe and secure. By addressing common issues like broken tracks, rollers and handles, you can prevent expensive repairs in the future. Contact us for more information on patio doors. We can help you maintain your sliding
patio sliding door repair near me doors in great condition by assessing your
repair patio door requirements. Our experts can also assist with any replacement parts you might require.
Damaged or loosely held door frame
Sliding patios doors are a great addition to any home. They are a practical and attractive alternative to hinged or swing-open doors for patios. However, like any other type of hardware doors, they can experience many issues over time. A lot of these issues can be fixed with a bit of DIY expertise.
A gap in the frame is a common issue with
sliding patio door repair service patio doors. This could be due to a variety of factors, including rollers or tracks that are not aligned properly, a damaged track or door, or a bowed door frame. In the majority of cases the reason for this issue is easily remedied by taking the door off and reattaching the track or rolling elements. This must be done with extreme caution to avoid harm the track or frame.
In certain situations, it could be necessary for the entire track to be replaced. This can be accomplished easily using a universal kit, which is available in most major hardware stores. These kits are simple to install and will have your door functioning perfectly in no time.
Examine the hardware of your sliding door and frame for signs of wear, like loose bolts or screws. This is an easy and effective DIY patio maintenance step that is done using an electric screwdriver. It is also important to grease the tracks and rollers of your patio door to ensure smooth operation and prevent premature wear.
Patio doors are often the main entrance to the backyard and outdoor living space for many homeowners. As such, they need to to function properly to ensure the safety of their homes and provide security. By taking the time to follow these simple DIY maintenance steps, homeowners can prolong the life span of their sliding
patio sliding door repair near me doors and reduce the cost of repairs or replacements.
Faulty Handle
Patio doors that slide open are an excellent way to get into your home and gain access to your backyard, but they can be difficult to operate when they are misaligned. A defective handle can cause the door not to open or close properly. The good news is that fixing a loose handle is a simple task that can be done at home.
In most cases, a loose grip is a result of screws that have fallen out of the backplate. To resolve this issue, simply tighten the two screws on the inside of the handle with the help of a screwdriver. If you notice that the handle remains loose, it could be a sign that the threads have damaged and must be replaced.
A broken latch could be the cause. It is more likely the latch will break if made of metal instead of plastic. Try lubricating the latch in case it isn't catching, or turning. If this doesn't work, you may have to replace the lock.
Finally, the handle itself may become difficult to operate in the event that it is broken or cracked. If this happens it is essential to replace it with a new handle that matches the style of your sliding patio door.
If your patio doors are old and outdated or new and brand new, Feldco can help you get them back on the right track. We have high-quality doors available in various sizes and styles that can be adapted to fit your home perfectly. For more information about our doors, contact us now! We proudly serve homeowners in Southern California, including Ventura County, Orange County & San Diego County.
Faulty weatherstripping
It's time to replace your weather stripping if see light around closed windows and doors, or notice a draft pushing at the window or door. The strips form a tight seal that prevents insects, air, and water from getting into your home. They also help keep your conditioned and heated air inside, thereby saving money on your energy bills all year long.
It may have lost its positive, bouncy seal due to aging. It is easy to determine this by taking a dollar bill and putting it under the seal on top of the door frame as well as the bottom of the door jamb where they overlap. If the dollar bill slides easily between the seal and the door easily it is time to replace the weatherstripping.
It's tempting to cut out only the worn section of weather stripping and then replace it, but this could cause cracks on both sides of the new stripping and could cause issues with the seal in the future. It's much more efficient to replace the entire stripping. This will allow you to be assured that your door will be sealed properly.
For a simple DIY project take a look at our guide to weather stripping to remove old weather stripping and then apply the correct material on your sliding patio door and frame for a lasting, tight seal. It's a great method to repair your door and reduce your energy bills Don't put off the project until it's too late. You'll be able to save money and enhance the look of your home.
