Repairs to uPVC Windows
uPVC is a great choice for modern homes. They are long-lasting, durable and easy to maintain. Unlike timber and aluminium, they are not susceptible to get rusty or decay.
Cleaning and lubricating regularly UPVC windows and doors is vital. This will reduce repair costs as well as improve energy efficiency.
1. Broken Glass
If the glass in your window has been damaged, it can cause a huge amount of damage to your home, making it very dangerous and potentially fatal. You should take the time to ensure that your windows are in good shape.
For single pane windows, it is fairly easy to replace windows, and the new one is usually able to fit into the frame of the previous one easily. If windows with
double glazed window repairs panes are joined by internal beading, it is difficult to remove and replace the old panes. In this case it is essential to purchase plastic spacers in order to make sure that the new pane fits into the window frame.
Wearing eye protection and thick gloves is essential when you are planning to remove the glass yourself. It is also recommended to lay down a drop cloth before you begin working on the window panes to ensure that any shards of glass fall onto the fabric and not on the floor, where they could be trampled.
Once the glass is removed from the window, it's best to seal the gap with packaging tape or duct tape to block water and drafts from getting into the property until a professional can come out and repair the window. It also acts as a barrier to prevent any intruders from making their way into your home. If the distance between the door and the window is substantial, you may prefer security screens that includes windows. This will give you the best of both.
2. Sagging
Upvc is a long-lasting and energy efficient alternative to timber sash windows. However, over time they are susceptible to a range of problems including sliding. A sagging uPVC windows can cause problems with light, draughts and even security. It is crucial to act as soon as you discover that your uPVC windows are sliding.
To repair a window that is sagging, you can try to reposition the hinges. To accomplish this, you'll need open the window to get to the frame. Then, you can remove the hinges at the top and bottom using a screwdriver and adjust the hinges clockwise or counter-clockwise. Close your window to check the fit after having repositioned your hinges. If you're happy with the fit, you can tighten the screws until they stay in place.
If you are unable to reposition the hinges you may need to replace the seal. Rubber seals may dry out and lose their elasticity over time, leading them to loosen. If this happens, it's essential to replace the seal as soon as possible so that your uPVC windows are waterproof and draught-proof.
uPVC handles may also become loose. This is usually due to screws that have loosened over time, but it can be caused by the handle mechanism wears out. It's relatively simple to fix a loose uPVC hand. You'll first need to close the window and perform a test fitting. The joints at the corners of the sash must align with the joint on the casing. If it does not, you can use the screwdriver to loosen up the handle. Then, you can turn the mechanism back into place.
3. Water Leaks
If you wake up to damp floors and mouldy walls each time it rains it is important that you take action. The leaks of water through windows could cause structural damage to your home and affect your ability to regulate the temperature inside your home. The most frequent reason for leaking uPVC windows is that the sealant around the frame is either damaged or missing.
This is a relatively easy fix and should be undertaken by any DIY expert. Depending on the severity of the problem the old caulking may need to be removed before a new layer of caulk can be applied. It is crucial to remember that when it is about
upvc window repairs (
Discover More Here), you should not be tempted to apply too much caulk' as this will only make the area harder to clean and can reduce the efficiency of your energy.
Verify that the drainage holes are free of debris in them, and also ensure that the sill pan is properly angled to allow the water to drain from the window. In more severe situations, you may have to replace the window.
Other indicators of long-term water leakage are sills that are rotten and the appearance of black spots of mold on the wall near the window. The fungus thrives in conditions of dampness and can spread quickly throughout the home.
It is also important to keep in mind that if the leakage is coming from between the glass in your
double glazed window repairs glazed windows, it is more likely to be an issue with the glass seal rather than the frame or sliding. A uPVC specialist can fix this issue by replacing the glass seal. This will restore the full insulation of your windows.
4. Faulty Hinges
If your uPVC windows are stiff to open, or are loose and blow open in a breeze It could be hinges that are at the fault. These are easily repaired by any DIYer who is skilled and are usually completed in a matter of minutes.
Like any mechanical component hinges are prone to wear out over time. It is essentially a very simple process, but it's simpler if you have someone to assist in holding the frame in place.
Check that the uPVC hinges open and close in the proper direction. This can be done by checking for the arrows on each hinge. This shows which way the window should open.
The problem with the hinges on windows could be the result of incorrectly opening the window a certain way or by poor installation at the factory. It is usually possible to fix the issue by sending us a photo on our website. We will be pleased to offer you advice.
Regularly lubricating the hinges is also necessary. Applying a light engineering lubricant to the hinges is an ideal method to accomplish this. We suggest using the lubricant that doesn't contain solvents, such as 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also stop corrosion and decrease the chance of sticking. Ideally, you should do this at least once a year. WD40 and other solvent-based fluids are not recommended since they could damage parts of your uPVC window.
5. Draughts
Draughts can be caused by a variety of different things. First, the hinges due to wear and tear could become misaligned. This causes an opening to appear where the sash meets the frame. This can be easily repaired by giving them good cleaning, but if they are beyond repair it might be necessary to get them re-aligned or replaced. In addition, the interlock could also become misaligned. This happens on the hinge's side, and may need to be cleaned. In some cases it is possible to replace them.
The next most common cause of draughts is the window seals. They are prone to wear or damaged over time, and allow air to escape through these gaps. Installing high-quality weatherstripping is a good way to keep draughts at bay. Replace the upvc windows with low-emissivity glass. This will help to regulate indoor temperatures and lessen draughts.
The last way to reduce the amount of draughts is to use a Draught-excluder. These are typically fabric tubes filled with a filler which can be hung over your window sill. These will help to keep cold air out and keep your home warm and cosy!
With a bit of regular maintenance and repair windows made of upvc will continue to provide excellent insulation and security for your home. It is important to remember that all windows eventually get worn out and it is more cost-effective to simply replace them instead of fixing them. If you encounter any issues with your upvc window, it's best to consult a professional as soon as you can.
