Repairs to uPVC Windows
uPVC windows are a great choice for modern homes. They are easy to maintain, durable and long-lasting. As opposed to aluminium and timber they are not susceptible to get rusty or decay.
Cleaning and lubricating regularly UPVC windows and doors is crucial. This will prevent unnecessary repair costs as well as improve energy efficiency.
1. Broken Glass
If the glass in your window has been damaged, it could cause a large deal of damage to your home, which can make it very dangerous and potentially fatal. It is crucial to take the time to make sure that you are doing everything you can to ensure that your windows are in good condition.
For single pane windows, it is relatively easy to replace windows, and the new one is usually able to fit into the frame that was previously installed easily. If windows with double panes are joined by internal beading, it is more difficult to remove and replace the panes that were previously in use. In this instance you'll need to source some plastic spacers to aid the new pane in being able to fit perfectly into the frame of the window.
If you plan attempt to remove the glass panes yourself it is crucial to wear the appropriate safety equipment that includes gloves with a thick layer of material and eye protection. It is also an excellent idea to lay down a drop cloth before you begin working on the glass, so that any shards will fall onto the fabric instead of landing on the floor where they can be trampled on and cause further damage.
It's a great idea tape the gap once the glass is removed. This will keep water and drafts from entering your property until a professional comes out to fix the window. It also acts as a barrier that will prevent any intruders from getting access to your home. If the gap is large, you might want to consider using a security door that has an integrated window, since it will provide the best of both worlds.
2. Sagging
Upvc is a long-lasting and energy efficient alternative to timber sash window. In time, they could develop a variety of issues, including sagging. A sagging uPVC windows could cause issues with light, draughts and even security. If you notice that your
upvc window repairs near me window is beginning to lose its shape, it is important to act swiftly to stop the issue from worsening.
To repair a window that is sagging, you can try repositioning the hinges. First, you'll need to open the windows so you can get at the frame. You can then unscrew both the hinges at the top and bottom using a screwdriver and adjust them counter-clockwise or clockwise. Close your window to test the fit after you've moved your hinges. If you're happy with the fit, tighten the screws until they stay in place.
If you cannot reposition the hinges, you may have to replace the seal. As time passes, rubber seals lose their elasticity and become dry and cause them to lose tightness. It is crucial to replace your seal as quickly as you can in order to ensure that your uPVC window watertight and draughtproof.
UPVC handles can also loosen. This is typically caused by screws that have been removed over time, but it can also be caused by the handle mechanism getting worn out. It's fairly simple to repair a loose uPVC handle. First, you'll need to close the window and do a test fitting. The corners of the sash must be aligned with the casing joint. If it does not then you can use the screwdriver to loosen the handle. Then, you can turn the mechanism back into place.
3. Water Leaks
It is important to take action if wake up every morning to find a smoky wall and wet floors. Leaks of water from windows can cause structural damage to your home and affect your ability to regulate the temperature of your home. Most often, uPVC window leaks are caused by damaged or missing sealant.
This is an easy fix that can be done by any DIYer who has the ability. Based on the severity of the issue the old caulking might need to be removed before a new layer can be put on. It is essential to remember that when it comes to uPVC
window repairs you should not be tempted to 'over-caulk and then make the area harder to clean and could decrease the efficiency of your energy usage.
Check that any drainage holes are free of debris in them and ensure that the sill pan has been properly angled to allow the water to drain from the window. In more serious instances, you may need to think about replacing the window.
Other signs of long-term water leakage are sills that are rotten and the appearance of black spots of mold on the wall near the window. This fungus thrives under damp conditions and can spread quickly throughout the home.
If the leakage is occurring between the
double glazed window repairs-glazed window, it is more likely the problem is with the seal than the frame. A uPVC specialist can fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.
4. Faulty Hinges
If your uPVC windows are stiff to open, or loose and blow open with ease, it may be the hinges that are at the fault. They can be easily replaced by any competent DIYer and can be completed in a matter of minutes.
Most households in the UK will have either top hung or side hung uPVC windows that have hinges and like any mechanical part they will wear out over time. Changing a window hinge is essentially a very simple process, but it's simpler if you have someone to assist in holding the frame up.
Check that the uPVC hinges open and close in the right direction. This can be done by checking for the arrows on each hinge, this indicates which way the window should be opened.
Window hinges that aren't working properly could be caused by improperly opening the window in a certain way or by improper installation in the factory. Sending us photos via our website is often enough to solve the issue. We are more than happy to provide advice.
Regularly lubricating hinges is also essential. This can be done by applying a light engineering oil on the hinges, we recommend using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regularly lubrication will help the window operate and close more easily. It can also lower the chance of windows getting stuck and stop corrosion. This is recommended to be done at least every year. WD40 and other solvent-based lubricants should not be used since they can cause damage to your uPVC windows.
5. Draughts
Draughts in Upvc windows can be caused by a variety of different things. The hinges can also become misaligned due to wear, creating an opening where the sash and frame meet. If they are beyond repair, it might be necessary to get them re-aligned. The interlock, which is located on the hinge of the window, may also become misaligned, again it may be feasible to give them a thorough clean, however in certain cases, it may be necessary to have these replaced.
The seals may wear out or be damaged over time, allowing air to escape. This can be prevented by replacing them with high-quality weatherstripping. Replace the windows made of
upvc window repairs near me with low-emissivity lenses. This will help to regulate indoor temperatures and decrease draughts.
Another method of reducing the amount of draughts is to use a draught-excluder. These are usually made of fabric tubes filled with a filler which can be hung over your window sill. They can keep your home warm by blocking cold air.
With a little regular maintenance and repairs, your upvc windows will provide excellent security and insulation for your home. It is crucial to recognize that all windows have a life span and they may reach an point at which it is more economical to replace them than repair them. If you are experiencing problems with your upvc windows, it is recommended to seek help from a professional as soon as possible.
